How does it work?
Attention! Always check if your watch is waterproof and make sure the crown is turned all the way!
1. Spray the Cleaning Spray directly onto the watch and the steel strap. Spray generously so that the liquid can loosen the dirt well. (If your watch is very dirty, rinse it under the tap first).
2. Use the CyW brush to clean the watch thoroughly.
3. After step 2, if your watch is very dirty, rinse it first under the tap or in a bowl of lukewarm water. Repeat steps 2 and 3 until all the dirt is gone.
4. Dry the watch with the long fiber side of the soft nano cloth.
5. Spray the Shine&Protect Spray on the watch and let it work for 10 seconds.
6. Use the short fiber side of the CyW Nano Cloth to dry and polish to a radiant result.
Follow these simple steps
PLEASE NOTE! Always check if the watch is waterproof and ensure the crown is fully screwed down!
Cleaning Spray
Spray the Cleaning Spray directly onto the watch and steel strap. Don't be too sparing with the spray, so the liquid can effectively loosen the dirt. (If your watch is very dirty, rinse it thoroughly with lukewarm water first)
Spray the Cleaning Spray directly onto the watch and steel strap. Don't be too sparing with the spray, so the liquid can effectively loosen the dirt. (If your watch is very dirty, rinse it thoroughly with lukewarm water first)
CYW Watch Brush
Use the special soft CYW brush to remove dirt from between the links and crevices. Wet thoroughly before use!
Rinse well
If the watch is very dirty or has a lot of stubborn grime on it, rinse it thoroughly before and after use. Repeat steps 2 and 3 until all dirt is gone.
Drying
Use the large, soft CYW Nano Cloth to dry the watch thoroughly.
Shine & Protect Spray
Spray the Shine & Protect onto the watch. Don't be too sparing and allow it to work for 15 seconds.
Drying and polishing
Again, use the CYW nano-cloth to dry and polish the watch to a brilliant shine!